Hadco TSS344-15 Transformer
12, 13, 14, and 15volt Output - for
Design Flexibility and Longer Cable Run Capability
Housing: Housing is 304 brushed stainless steel case with stainless steel screws and lockable captive door, hinged on bottom. Weather-proof compartment for plug-in time clock. ½" Knockouts on each side for hardwiring or accessory mounting. In the enclosed bottom there are four to eight double knockout for ½" or ¾" conduit. Internal transformer is epoxy encapsulated. Exterior Mounting - Transformer should be mounted on the wall, structure, or post in the vertical position. Cable entries should be positioned downward.
Electrical Assembly: 6-ft
heavy-duty 18-3 AWG, 105° C, SJT power cord with 3 prong grounded wall
plug. The transformer is thermally protected on primary, and
secondary side is protected by circuit breaker. Shielded between primary and
secondary. Insulation type transformers for safe operation.
Euro-Board terminal block for easy low voltage cable attachment. Line
voltage amperage draw: 300VA = 2.7 amps. 12, 13, 14, and 15 volt output
taps for design flexibility and longer cable run capability.
Certification: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Warranty: Lifetime limited warranty.
Height: 11 3/8"
Width: 6 3/8"
Depth: 5 5/8"
Max. Weight: 13.16 lb
Accessories
|
