Hadco DAL1 Decklyte
12 Volt - Low Voltage Landscape Lighting
 
Housing: Body and mounting plate are cast aluminum construction. Fasteners are 300 series stainless steel.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
Optical Assembly: Frosted tempered glass lens . Reflector is a stamped specular aluminum.
Lamping: 10W maximum T3 bi-pin lamp. Lower wattage lamps are acceptable. 10W T3 lamp is included with fixture.
Electrical Assembly: Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
Installation & Mounting: Two (2) Stainless #8 wood screws (supplied) via key slots.
Warranty: Three-year limited warranty.
Certification: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
Height: 3 1/2" (89mm)
Width: 3 1/2" (89mm)
Depth: 1 7/8" (48mm)
Max. Weight: 0.75 lb
Step and Deck
 | Security Lighting
 |
|
