Hadco IL116 Inground
12 Volt - Low Voltage Landscape Lighting
Housing: Single-piece compression molded fiberglass reinforced polyester composite. Trim ring is a compression molded polyester.
Finish: Composite is textured, pressure formed, molded-in-color.
Optical Assembly: Clear convex, tempered soda-lime glass for high impact resistance. 2,200-pound live-load rated, standard walk-over.
Lamping: 75W maximum MR16 bi-pin lamp. Covered MR16 are recommended to protect lamps inner capsule. Lower wattage lamps are acceptable.
Electrical Assembly: Bi-pin socket type (GU5.3) with 250° C high temperature teflon coated wire leads. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
Warranty: Ten-year limited warranty.
Certification: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. ADA Compliant when used in concrete and flush mounted with CP2 or CPS2.
IP Rating: IP66/68 to 1M (3.28FT): Dust-tight and dual rated - sealed against direct jets of water and against continuous immersion up to a depth of 1 meter (3.28 feet).
Height: 8 7/16" (214mm)
Width: 6 5/8" (169mm)
Max. Weight: 3.5 lb
Tree Lighting
 | Security Lighting
 | Grazing
 |
|
