Hadco IUL516 Inground
12 Volt - Low Voltage Landscape Lighting
  
Housing: One-piece injection molded ULTEM® High Performance Polymer composite. Lens ring is a Single-piece injection molded ULTEM® High Performance Polymer with gasketed lens. Twist-off operation for ease of maintenance.
Finish: Composite is textured, pressure formed, molded-in-color.
Optical Assembly: Clear convex, tempered glass furnished with silicone O-ring for watertight seal. Lamping: 50W maximum MR16 bi-pin lamp. Lower wattage lamps are acceptable. Covered MR16 are recommended to protect lamps inner capsule.
Electrical Assembly: Bi-pin socket type (GU5.3) with 250° C high temperature teflon coated wire leads. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
Accessories: IBL16 Ice Blue Lens. ISL16 Spread Lens. IAS16 Linear Spread Lens. ICG16 - Internal snap on Honeycomb louver (Lamp MR16). CP5 - Concrete Pour Kit.
Warranty: Ten-year limited warranty.
Certification: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
IP Rating: IP66/68 to 1M (3.28FT): Dust-tight and dual rated - sealed against direct jets of water and against continuous immersion up to a depth of 1 meter (3.28 feet).
Height: 4 3/8" (111mm)
Width: 4 1/8" (105mm)
Max. Weight: 1.24 lb
Photometric Data:
Tree Lighting
 | Security Lighting
 | Grazing
 |
|
